Best Kitchen Cabinet Pot Drawer is free HD wallpaper. This wallpaper was upload at December 10, 2019 upload by admin in Kitchen Cabinet.
Description: Best Kitchen Cabinet Pot Drawer from the above 1020x1530 resolutions which is part of the Kitchen Cabinet. Download this image for free in HD resolution the choice "download button" below. If you do not find the exact resolution you are looking for, then go for a native or higher resolution.
- Author : admin
- Posted : 10 December 19 09:06:28
- Category : Kitchen Cabinet
- Tags : kitchen base cabinets pot drawers, kitchen cabinet pot and pan drawer, kitchen cabinet pot drawers
- File Size : 180 KB
- File Type : image/jpeg
- Resolution : 1020x1530 Pixel
- Viewed : 28 Visitor
Kitchen Cabinet Pot Drawer-today we’re turning my wife’s kitchen cabinet into some slide-out drawers. we’re starting with this half-inch plywood. all right so continuing on with our cabinet drawer pull out so what we’ve. done is we’ve gotten the original shelf that was in the cabinet that’s right. here and basically we’ve subtracted the width of the two sides and we’ve also. subtracted that piece in the back so I ended up cutting a little bit off of the side and a little bit off the back now the other thing you have to keep in mind.
when you go to install the drawer slides you have to factor in the width. of the drawer slides because they’ll also be adding some width so the. instructions actually tell you exactly how much so it’s adding half an inch of. the width and with half an inch on either side since there’s two drawer slides. that’s another full inch that you have to subtract so our opening itself is 26. inches we subtracted an inch for the two sides and then another inch for the. drawer slide so that should give us the clearance we need for it to actually. pull out I think that’s about it so really all that’s left is getting these sides and back attached
I’m gonna attach them with glue and some screws. actually probably some finished nails screws might be a little bit much for. this the sides and the back are all four inches tall. I got one side nailed on well glued and then I put this top nail and the bottom. nail all the way in and then we’ll just go through and hammer the rest of these in. I do not have a finish nailer so I’m doing this the old-school way with the. hammer and nails but it works just fine so more proof that you don’t have to have all the tools and all the fancy things to have a nice functional shop.
that gets things done alright so I’ve jumped ahead a little. bit installing the drawer glides is. pretty straightforward and simple just follow the directions that come with the. drawer glides these ones are rated to hold a hundred pounds each so there’s. that one and obviously them on the other side so this drawer can hold 200 pounds. which is way more than we need. We are just using it to store Tupperware you can see. I did have to add a little bit of a spacer on each side that’s because of these. cabinets are face-frame cabinets there was also a bar that ran vertically up to. the top and we cut that out to make room for the drawers we can slide in and out.
but it’s in it’s smooth it shuts far enough we can close the cabinet doors. and we’ve got our childproof lock here for our one-year-old all in all turned. out great really easy project and it just adds a. a whole lot of functionality to this area and makes a lot easier to get stuff in. and out
Download Best Kitchen Cabinet Pot Drawer with original resolution Click Here!